drone – Let'sFly3D

UBad Kama – HD Pod – for Connex Prosight

Shawn Morrison — Mon, 05 Dec 2016 22:22:32 +0000

The Kama Pod is an awesome way to keep your electronics safe, and now, you can do the same with your HD Electronics.

This kit comes with the Pod, the Antenna holders, and the camera backpack that allows it to line up with standard hs1177 holes.

The pod and antenna protector mounts are made from TPU and the backpack is made with PETG.

hardware not included:

(4) 10mm M3 button head screws

(4) m3 non-locking nuts

(2) servo screws, or 8mm m2 screws for fpv cam mounting.

MRM Scythe/XBR GoPro Session Pod

Shawn Morrison — Mon, 28 Nov 2016 22:25:43 +0000

Made from TPU, this Session Pod is based off of a thingiverse file. I redesigned it to allow for camera mounting, and non-nylock style nuts to be integrated.

Hardware not included:

4 non-nylock m3 nuts

4 10mm m3 screws

2 8mm m2 screws for foxeer cam, or servo screws for hs1177

X-Frame GoPro Session Mount

Shawn Morrison — Sun, 27 Nov 2016 07:10:25 +0000

This GoPro Session mount was built for the UBad Katana, but works with most x-frames featuring a flight controller-stack mounting shape.

Made from TPU, it is nearly indestructible, and will help protect your gopro session.

Camera angle at 35 degrees.

UBAD Kama – Hero 3/4 – Pod

Shawn Morrison — Sun, 20 Nov 2016 01:41:52 +0000

The UBAD Kama Hero Pod protects your electronic guts from dew, dirt and grass, and now it can hold a GoPro Hero 3 or 4.

Made from TPU.

FPV camera angles – 30,45-60

GoPro Angle – 30 – foam can be added to increase angle.

Hardware not included:

8mm m2 screws or servo screws for mounting fpv camera

(4) 10mm m3 screws and non-nylock m3 nuts for mounting

Kama Pod V2 – with GoPro Session mount

Shawn Morrison — Thu, 17 Nov 2016 18:40:27 +0000

The Kama Pod v1 is awesome, but didn’t allow for any hd camera mounting.

The Kama Pod v2 is lighter, provides better mounting options, and carries a GoPro Session.

I would love to have kept the bolts under the pod for looks, but, in order to create a lighter pod, it couldn’t be done.

Made from TPU.

needed hardware (not included):

(2) either servo screws or 8mm m2 screws for fpv camera.
(4) 10mm M3 Button head screws for mounting
(4) (NON-NYLOCK) M3 nuts for mounting – the nylock ones will strip out the TPU.

These pods are extremely durable, and will keep your electronics safely enclosed.

Holes were purposely left out, so that builders can customize the pod to their building style with a soldering iron (a soldering iron can make holes quickly and easily in TPU)

Kama Pod

Shawn Morrison — Wed, 28 Sep 2016 01:21:47 +0000

The UBAD Kama is a work of art. With this 3d printed pod, it looks even better. But, not only that, it protects the flight controller, vtx, and rx from grass and water from the morning dew. (I didn’t say waterproof, it’s not the iPhone…)

(ESC covers, and vtx mount not included – if Katana VTX mount is purchased on the same order – or if it is purchased with a comment that it is for the Kama, it will be sent with 2 standoff spacers)

It is designed for a 2.1 or a 2.5mm lens, to allow the camera to notch into 30, 45, and 60 degree slots. An adapter ring will be included to allow for 2.8mm lens.

This pod does not come with hardware – you will need to source 4 m3 screws, 4 nuts (non-nylon – to be inserted into the pod) and 2 longer screws for your fpv camera.

For the standard hs1177, I used servo screws that I had laying around, but for the Foxeer camera, I needed to source some longer m2 screws.

examples (length may vary):

ABS Launch Pads

Shawn Morrison — Fri, 09 Sep 2016 21:57:24 +0000

Tired of your quad facing the sky on race day? Tired of props getting caught in the grass? Tired of your quad sitting crooked on the battery?

Solution: Let’s Fly 3D Take-Off Pads.

Glue them together, or leave them unglued, for travel.

Velcro them to your flight box.

Take Off….

comes as 4 pieces of pre-cut ABS plastic

Foam Board Take-off Ramps – (set of 2)

Shawn Morrison — Fri, 09 Sep 2016 18:38:35 +0000

Tired of your quad facing the sky on race day? Tired of props getting caught in the grass? Tired of your quad sitting crooked on the battery?

Solution: Let’s Fly 3D Take-Off Pads.

Hot glue them together.

Velcro them to your flight box.

Take Off….

comes as 8 pieces of pre-cut foam (2 take off ramps)

X Frame – VTX/XT60 Mounts

Shawn Morrison — Tue, 26 Jul 2016 20:20:25 +0000

The X Frame XT60 and VTX mounts were designed for the UBAD Katana, but fit most x frame quads that use standoffs on top of the flight controller.

These mounts were designed to take the place of the spacer between the pdb and flight controller. They are 10mm high.

(4) 25mm m3 screws are recommended to mount the pdb and flight controller for adequate space.

This is packaged as one of each: one VTX and one XT60 mount.

Tiny Whoop Camera Mount

ShawnM — Fri, 24 Jun 2016 04:21:09 +0000

Camera mount for Tiny Whoop – Inductrix with built in angle.