Pods/Skirts/Condoms – Let'sFly3D

Opterra Session Mount

Shawn Morrison — Mon, 19 Dec 2016 20:17:14 +0000

The Horizon Hobby Opterra comes with a bunch of mounts, but no GoPro Session mount. Here is the solution.

Made from TPU, this mount is very light and effective.

UBad Kama – HD Pod – for Connex Prosight

Shawn Morrison — Mon, 05 Dec 2016 22:22:32 +0000

The Kama Pod is an awesome way to keep your electronics safe, and now, you can do the same with your HD Electronics.

This kit comes with the Pod, the Antenna holders, and the camera backpack that allows it to line up with standard hs1177 holes.

The pod and antenna protector mounts are made from TPU and the backpack is made with PETG.

hardware not included:

(4) 10mm M3 button head screws

(4) m3 non-locking nuts

(2) servo screws, or 8mm m2 screws for fpv cam mounting.

MRM Scythe/XBR GoPro Session Pod

Shawn Morrison — Mon, 28 Nov 2016 22:25:43 +0000

Made from TPU, this Session Pod is based off of a thingiverse file. I redesigned it to allow for camera mounting, and non-nylock style nuts to be integrated.

Hardware not included:

4 non-nylock m3 nuts

4 10mm m3 screws

2 8mm m2 screws for foxeer cam, or servo screws for hs1177

UBAD Kama – Hero 3/4 – Pod

Shawn Morrison — Sun, 20 Nov 2016 01:41:52 +0000

The UBAD Kama Hero Pod protects your electronic guts from dew, dirt and grass, and now it can hold a GoPro Hero 3 or 4.

Made from TPU.

FPV camera angles – 30,45-60

GoPro Angle – 30 – foam can be added to increase angle.

Hardware not included:

8mm m2 screws or servo screws for mounting fpv camera

(4) 10mm m3 screws and non-nylock m3 nuts for mounting

Atmospheric Adventures Aeolus Pod

Shawn Morrison — Thu, 17 Nov 2016 18:56:05 +0000

The AAA pod is a lightweight solution to keep your electronics safe.

Made from TPU, it features an xt-60 connector mount in the rear – simply double-sided tape the xt-60 to the carbon fiber, and the pod is still removable.

Camera angles lock in at 30,45,60 degrees.

hardware not-included:

(2) 8mm m2 bolts or servo screws for fpv camera

(4) 10mm button head m3 screws for mounting

(4) m3 non-nylock nuts for mounting – nylock nuts will strip out the TPU!!!

Kama Pod V2 – with GoPro Session mount

Shawn Morrison — Thu, 17 Nov 2016 18:40:27 +0000

The Kama Pod v1 is awesome, but didn’t allow for any hd camera mounting.

The Kama Pod v2 is lighter, provides better mounting options, and carries a GoPro Session.

I would love to have kept the bolts under the pod for looks, but, in order to create a lighter pod, it couldn’t be done.

Made from TPU.

needed hardware (not included):

(2) either servo screws or 8mm m2 screws for fpv camera.
(4) 10mm M3 Button head screws for mounting
(4) (NON-NYLOCK) M3 nuts for mounting – the nylock ones will strip out the TPU.

These pods are extremely durable, and will keep your electronics safely enclosed.

Holes were purposely left out, so that builders can customize the pod to their building style with a soldering iron (a soldering iron can make holes quickly and easily in TPU)

Kama Pod

Shawn Morrison — Wed, 28 Sep 2016 01:21:47 +0000

The UBAD Kama is a work of art. With this 3d printed pod, it looks even better. But, not only that, it protects the flight controller, vtx, and rx from grass and water from the morning dew. (I didn’t say waterproof, it’s not the iPhone…)

(ESC covers, and vtx mount not included – if Katana VTX mount is purchased on the same order – or if it is purchased with a comment that it is for the Kama, it will be sent with 2 standoff spacers)

It is designed for a 2.1 or a 2.5mm lens, to allow the camera to notch into 30, 45, and 60 degree slots. An adapter ring will be included to allow for 2.8mm lens.

This pod does not come with hardware – you will need to source 4 m3 screws, 4 nuts (non-nylon – to be inserted into the pod) and 2 longer screws for your fpv camera.

For the standard hs1177, I used servo screws that I had laying around, but for the Foxeer camera, I needed to source some longer m2 screws.

examples (length may vary):

Voodoo 210 V2 – Skirt – Let’s Fly 3d version

Shawn Morrison — Sun, 24 Jul 2016 01:03:05 +0000

The Let’s Fly 3D version of the Voodoo skirt has been completely redesigned from scratch to be lighter weight and to hold the xt60 plug more secure than the thingiverse version.

Keep you internals safe without all that extra weight. The walls of the skirt are only 1mm thick, but insanely strong, printed with TPU.

UBad Katana Condom

ShawnM — Fri, 24 Jun 2016 04:16:38 +0000

The Katana Condom was designed to keep your innards protected.

Keep grass, and twigs from gumming up the works.

Mounting holes are provided on the sides for zip ties to allow vtx/rx and other items to be mounted.